RAINWAVE APK 1.0.10 - Free Download

Download APK

Last updated: 7 May 2024

App Info

A smart & efficient method to manage garden watering & large scale irrigation.

App name: RAINWAVE

Application ID: com.rainwave.bluetoothtimer

Rating: 0.0 / 0+

Author: Yuan Mei

App size: 13.96 MB

Detailed Description

By using our free app on your Android or iOS smartphone (minimum required iOS 9 or Android ver. 7.0), this water timer can be programmed wirelessly, allow you to use your smart phone or tablet to control all the programming and interface functions on your water timers or irrigation controllers.

- The app has easy-to-follow cues that are displayed on your smartphone to guide you through the process.

- The timer can be set to water on any or all days of the week, from 10 times or more per day, with a duration ranging from one minute to 12 hours.

- The water-delay setting lets you postpone your irrigation cycle without losing your preset program.

- You can also manually control the settings right at the faucet, without using the app. You can even manage multiple timers from the same app.

- These tap timers will automatically water sequentially once they are programmed via your smartphone or tablet. No need to open the user’s guide to figure which buttons to push.

- The App is highly intuitive and programming is simple.


Features & Benefits:

- Smart Bluetooth® garden timer where you change the method of watering your garden from a range up to 30 m (100 ft) without interference. Enables you to control your garden’s watering schedule from your smart phone, tablet remotely.

- Easy to install application and simple to operate.

- Daily, Weekly and cyclical programming. A four zone timer allowing you to water four different areas from the same faucet. Each zone can be programmed with different start time.(Single and two zone timers follow this same guide)

- Manage one or many controllers from a single app with the ability to name each controller, capture an image or uploaded from your gallery. You can replace the valve’s photo and name to easily distinguish between them where you want to water

- The timer is constructed using weather and UV- resistant ABS material housing and requires 4 x AA (1.5v) *Alkaline batteries, not incuded

- Works with water pressure from 10 to 120 psi

- Manual settings from the App is simple task (Manual watering in 1 minute increments up to 360 minutes)

- No need to open the user's guide to figure which buttons to push. The App is highly intuitive and programming is simple to use.

- Follow-up on scheduling by viewing the "Next Watering" feature
Download APK

App Screenshots

Similar